(See attached)
(See attached)
Its got a few spots...tail light panel and passenger rear quarter corner...but still worth the price IMO.
will get new seats and driveline...then off to the track!
...............
One more of the Duster, one of the donor Ramcharger...and the 390 stroker in the Ramcharger.
Dont have a whole lot to report on this, been to busy helping others with their projects to work on my own unfortunately.
Pulled the donor stroker motor from the Ramcharger, took it apart and found out the block was shot (water in a cylinder, rust). Got a new block and sent it to the machine shop to get worked over, then started looking at the old heads....the old motor ate pushrods so took the heads in and they found the previous builder installed the valve springs way wrong and they were going into coil bind long before the max lift of the cam was achieved (installation error, not spring selection error). Got that fixed and the crank polished and the rotating assembly rebalanced, and the shortblock components just need to go back together now. Need a few more things then it can go in the Duster....hopefully when it cools off some I'll get back into the swing of things.
Get to work on your own crap man,geesh.![]()
I know, I need to![]()
Dont get bummed out there is plenty of cars out there waiting to be discovered.
Bookmarks